Use of the Cone Calorimeter and ConeTools software for development of innovative intumescing graphite systems

The Cone Calorimeter test method has been one of the most used small‐scale fire test method for years now and is at present widely spread over the world. In contrast to many other fire test methods, the Cone Calorimeter provides a range of data with sound scientific basis, which allows a wide range of applications. It can be used for modelling and also for enhanced product development. This paper describes the use of the Cone Calorimeter for the development of new innovative materials in combination with a mathematical model. As example, the cost effective development of an innovative intumescing graphite system for protecting particle board is explained. The performance goal of the project is to obtain the threshold values for a B class in the Single Burning Item (SBI) test method used for the newly developed Euroclass system. The focus of this paper is on the development tools and not on the chemical development of the protective system. During the research it was necessary to develop a new sample holder for the Cone Calorimeter. The results from the project show that the industry can save development time and resources by using the Cone Calorimeter in combination with a simple mathematical model. Copyright © 2010 John Wiley & Sons, Ltd.     

Optical particle sizing in backscatter

Several possibilities for the use of elastic light scattering in the backscatter range (scattering angle theta(s) > 140 deg) for determination of size, velocity, and refractive index of spherical particles are investigated. First the phase Doppler technique is considered. Numerical simulations of light scattering with the Lorenz-Mie theory are used to show that the phase Doppler technique is unsuitable for such backscatter configurations, except for special measurement conditions. The time-shift (or pulse-displacement) technique is then considered by use of the Fourier-Lorenz-Mie theory. Simulations show that up to four fractional signals can be obtained by use of the technique in backscatter, corresponding to the scattering order or modes: surface wave (long path), reflection, second-order refraction (inner path), and a mixture of second-order refraction (outer path) and surface wave (short path). Signal characteristics as a function of particle size, refractive index, and particle ellipticity are studied. Suggestions for a practical measurement instrument are put forward.     

Surveyance of disease frequency in a population by linkage to diagnostic laboratory databases. A system for monitoring the incidences of hyper- and hypothyroidism as part of the Danish iodine supplementation program

In Denmark an increase in iodine intake through salt iodization has been introduced in 1998. In parallel a program for surveyance of thyroid diseases in the population was developed as recommended by UNICEF and WHO. OBJECTIVE: To develop and evaluate a computer based system to identify and register new cases of hyper- and hypothyroidism in a well defined cohort, by linkage to diagnostic laboratory databases. DESIGN AND RESULTS: (1) Two sub cohorts for monitoring were defined (n=535,859), and evaluated to minimize loss of new cases. Collaboration was established with laboratories covering thyroid hormone analyses in the cohort; (2) a diagnostic algorithm was defined and evaluated against clinical practice; (3) evaluation of the laboratory methods employed by the four participating laboratories, to ensure they would reach the same diagnosis in a patient; (4) a register database was developed which used data imported from the laboratory databases to automatically identify previously unknown cases of hyper- and hypothyroidism and record diagnostic activity in the area. All parts of the registration were carefully evaluated. CONCLUSION: We describe for the first time a computer based system for prospective measuring the incidence rate of hyper- and hypothyroidism. The system is particularly useful for monitoring of iodine supplementation programmes.     

Control of Magnetic Properties in (Cd,Mn)Te Quantum Wells Inserted in Pin Diodes

Using photoluminescence and photoluminescence excitation, weinvestigate the magnetic properties of (Cd,Mn)Te quantum wells inserted in pin diodes. Such structures give us the opportunity to tune the carrier density by applying a bias of the order of 1 V. Results obtained in a small magnetic field show the presence of magnetic domains, which persist as long as the quantum well is populated.     

Constitutive relationships for AlZnMg, AlZnMgCr, and AlZnMgZr alloys

The effects of zinc, magnesium, chromium, and zirconium on the steady-state flow stress during hot working of both as-cast and homogenized AlZnMg(Cr/Zr) alloys were determined by means of torsion testing. The equivalent strain rates varied between 0.01/s and 10/s and the temperatures ranged from 450 °C to 560 °C. The zinc and magnesium concentration varied from 4.5 to 7.5 wt pct and from 0.8 to 1.8 wt pct, respectively. In addition, alloys containing typically 0.15 wt pct zirconium or 0.20 wt pct chromium were investigated. Magnesium, zirconium, and chromium were found to increase the flow stress, whereas zinc had practically no effect. The flow stress in the homogenized material was in most cases higher than in the as-cast material. Fitting of the coefficients in the hyperbolic sine constitutive equation to the experimental results showed that some of the coefficients could be related to concentrations of magnesium and zinc in solid solution, whereas others might be regarded as constants. The following relationship was determined between the coefficients α and n and the magnesium and zinc concentration: α=a·[Mg] ^b and n=c·[Mg] ^d +e·[Zn]+f. The coefficients a, b, c, d, e, and f were determined by fitting of these relationships to the experimental data. The steady-state flow stress calculated by means of the constitutive equations was in good agreement with the experimental steady-state flow stress.     

Neighborhood network governance, ethnic organization, and the prospects for political integration

How may ethnic organizations work as mechanisms for political integration in suburban multicultural contexts with participative and network modes of governance? The overall argument of the paper is that a shift from vertical to more horizontal modes of governance affects the prospects for ethnic associations to fulfil different democratic functions. It does so in a complex, multidimensional and somewhat contradictory way. Although network modes of governance are often argued for in terms of openness and inclusion, it should not be taken for granted that such governance structures do promote democratic functions of ethnic associations. Drawing on an in-depth case study of ethnic associations and network politics in Botkyrka, Sweden, the purpose of the article is to provide theoretically informed arguments on how the political integration potential of ethnic organization is affected when they participate in local network-like arrangements and institutions. In brief, the article outlines three arguments: (1) There are different mechanisms of ethnic organization that might contribute to a more politically integrated society. (2) More horizontal network modes of governance generate new conditions for these integrative mechanisms to emerge out of ethnic organization. (3) In such a context of network governance, the different integrative mechanisms of ethnic organizations are not always supplementary, but sometimes contradictory, causing genuine dilemmas to be dealt with by local actors.     

Feedback consistency effects in visual and auditory word recognition: Where do we stand after more than a decade?

The role of phonology-to-spelling consistency (i.e., feedback consistency) was investigated in 3 lexical decision experiments in both the visual and auditory modalities in French and English. No evidence for a feedback consistency effect was found in the visual modality, either in English or in French, despite the fact that consistency was manipulated for different kinds of units (onsets and rimes). In contrast, robust feedback consistency effects were obtained in the auditory lexical decision task in both English and French when exactly the same items that produced a null effect in the visual modality were used. Neural network simulations are presented to show that previous demonstrations of feedback consistency effects in the visual modality can be simulated with a model that is not sensitive to feedback consistency, suggesting that these effects might have come from various confounds. These simulations, together with the authors' results, suggest that there are no feedback consistency effects in the visual modality. In contrast, such effects are clearly present in the auditory modality. Given that orthographic information is absent from current models of spoken word recognition, the present findings present a major challenge to these models. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A large-time-stepping scheme for balance equations

A well-balanced, large-time-stepping method for conservation laws with source terms is presented. The numerical method is based on a local reformulation of the balance law as a conservation law with a discontinuous flux function, and the approximate solution of this equation by a front tracking method. This yields an unconditionally stable method which is particularly well suited to calculate stationary states. The viability of this approach is demonstrated by several numerical examples. KHK has been supported in part by an Outstanding Young Investigators Award from the Research Council of Norway.